12" x 20" Monarch 10EE lathe S/N 10629

Stock No. 4161:

12" x 20", Monarch 10EE lathe S/N 10629

Accessories & Specifications:

1. New 6" Bison 3-jaw chuck

2. Phase II Quick Change tool  post set

3. 1 3/8" spindle hole & Dl-3 camlock spindle

4. 0 to 3500 RPM variable speed w/high/low ranges

5. 3 to 92 TPI (50), .001 to .0075 IN./REV. (50) feed

6. Coolant

Rebuilt To New Tolerances:

7. Totally disassembled including headstock, gearbox and apron.

8. All parts sandblasted to bare metal, sprayed with pure polyester resin, sanded with progressively finer grits

& painted with epoxy paint to new appearance.

9. All ways re-ground to new specifications and mating parts hand scraped to new bearing quality.

10. Headstock, gearbox and apron rebuilt with all new bearings and other parts if required.

11. All other bearings, seals, metering units and wipers will be replaced in the process of rebuilding.

12. New crossfeed and compound screws and nuts.

13. Tailstock housing reamed and honed round and straight with new tailstock quill made to fit.

14. New 5 HP AC variable speed motor with inverter drive.

Guarantee:

The machine will be guaranteed to hold new tolerance which means it will hold .0001 in four inches of length turned on a piece of steel and that the bed will be straight and parallel within .0001 per foot. All mechanical work is guaranteed one year with the exception of spindle bearings and electrical controls which are sixty days.

Taper Attachment: Add $2,500.00