Harry D. Hartman
Derek L. Hartman
20 Front Street PO Box 460
Marathon NY, 13803
 

Gallery Of Machines

New & Used Machinery

Machine Tool Remanufacturers

Telephone: (607) 849-6028

Complete Machine Directory  

Fax: (607) 849-6000

Harry@galleryofmachines.com

Financing Available!

NEW, RE-MANUFACTURED, REBUILT & USED MACHINERY FOR SALE

Below are the NEW lines of Equipment we offer!

SUPERMAX

Lathes Mills Drills Grinders
Sheetmetal, Fabrication Saws Woodworking Misc. Machinery

WEB SITE: HTTP://WWW.GALLERYOFMACHINES.COM    See our step by step procedure for rebuilding and retrofitting various types of machine tools.

NOTE:   Used machinery is guaranteed for 30 days, Rebuilt machinery is guaranteed 1 year except for spindle bearings and electrics which are guaranteed 60 days due to factors beyond our control.

REBUILDING & RETROFITTING : The major portion of our personnel are now involved in rebuilding machine tools to new tolerances for some of the larger corporations in upstate New York and northern Pennsylvania. We have also engineered the installation of CNC controls on a number of machines including Blanchard rotary grinders, Pratt & Whitney Triax machining centers, Elb surface grinders, and a 32" x 120" Monarch lathe. Our 5' x 5' x 20' Gray way grinder is holding .00003 per foot. This gives us the capacity to rebuild Bullard VTL'S, horizontal boring mills and DeVlieg Jigmils.

Definitions: The asking price for our used machinery has dropped substantially over this past year! Our machinery is generally priced "re-conditioned" and may be higher than some of our competitor's due to the "value added" as explained below.  We typically spend three to five or more days preparing a machine for sale and prefer to sell machinery this way in order to avoid having customer's think they were knowingly sold a "pig in poke".  We will give you an "As Is" price if requested.

As Is!: Machine is sold without any guarantee and work required on the machine is the purchaser's responsibly! However, we   will put the machine under power to determine potential problems. 

Re-Conditioned: We will disassemble the machine into it's major components, scrape ways once in each direction to improve     bearing quality as required, perform any necessary repairs, change oil and filters, test the machine for tolerances, and guarantee the machine to be in good operating condition! Machine is guaranteed 60 days!

Rebuilt: The ways will be re-ground to new tolerances and mating parts hand scraped to fit with proper bearing quality.   The machine will be guaranteed to hold new tolerances.  Gearboxes, spindles, hydraulic components are not included in a rebuild unless specified.  Guaranteed one year!

Re-manufactured:   The machine is 100% disassembled, stripped to bare metal, painted to factory quality. All ways are re-ground to new tolerances and mating parts are hand scraped to fit with proper bearing quality. All bearings, seals, feed screws and nuts, and other parts showing appreciable wear are replaced.   Guaranteed one year except electrical and spindle bearings which are 60 days due to factors which are typically beyond our control.

Home Company Profile Complete Inventory Site Directory
Way Grinding CNC Retrofitting Machine Repair Machine Design
Machine Modifications Available Mills Available Grinders Available Lathes
  Contact Us Email Us  

CNC MACHINERY:

Price ($)

Stock Number

Size, Type, and Description of Machinery

LATHES:   

Price ($)

Stock Number

Size, Type, and Description of Machinery

Get Quote #0000

MANY SIZES OF NEW ACER LATHES ARE AVAILABLE. CALL US FOR LITERATURE AND PRICES!

1,950 6511 Hardinge X - Y compound metric (new)
1,100 6512 Hardinge X - Y compound metric
1,100 6567 Hardinge X - Y compound
1,950 6513 6" Stocker & Yale Lathe Comparator
1,950 6895 10" x 36" Delta/Rockwell variable speed lathe, 6" 3-jaw chuck, top of saddle unworn
7020 10" x 20" Hardinge TBF-H lathe, rebuilt to new tolerances & painted like new
2,500 6280 12" x 24" Monarch 10EE var. speed lathe, T.A.
25,000 6052 12" x 24" Monarch 10EE var. speed lathe, new AC inverter drive, re-manufactured to new tolerances with factory quality paint
27,500 4161 12" x 20" Monarch 10EE var. speed lathe, 7" 3-jaw chuck, new AC inverter drive, remanufactured to new tolerances with factory quality paint  camera.gif (146 bytes)
3,750 6990 12" x 40" Enco (Dashin Prince) lathe, 6" 3-jaw chuck, S.R., F.R., hard ways, new Q.C.T.P. set, etc.
5,500 7021 13" x 28" Harrison M-300 lathe, 6" 3-jaw chuck, 3 HP 1 phase motor
8,500 6809 13" x 42" Harrison M-300 lathe, 6" 3-jaw & 8" 4-jaw chucks, 5-C draw tube, rebuilt and painted
7005 14" x 40" Nardini lathe
2,500 6875 16" x 60" South Bend lathe, 8" 3-jaw & 14" 4-jaw chucks, T.A.
5,625 14"/20" x 40" Victor GEARED HEAD LATHE, 3 & 4-JAW CHUCKS, S.R., F.R., ETC. - NEW!
10,350 14''/21'' x 40'' Victor ELECTRONIC VARIABLE SPEED LATHE, 3 & 4-JAW CHUCKS, ETC., DRO with CONSTANT SURFACE SPEED AVAILABLE - NEW!
$7,500 4773 15" x 42" Sheldon lathe, new 8" 3 & 4-jaw chucks, rebuilt to new tolerances & painted
6974 16"/22" Republic lathe, 8" 3-jaw & 10" 4-jaw chucks, S.R., F.R., F.P, 5-C lev. collet clos.
6736 16" x 55" Monarch Series 50 EVS lathe, 8" 3-jaw chuck, T.A.
6390 16" x 64" Monarch 1000EE variable speed lathe, 12" 3-jaw chuck, T. A., S. R.
10,900 6413 16" x 44" VICTOR LATHE W/ ACCESSORIES - NEW!
16" X 44" VICTOR ELECTRONIC VARIABLE SPEED LATHE W/ ACCESSORIES - NEW!
6,500 6392 18" X 60" Cincinnati Hydrashift geared head lathe, 12" 3-jaw chuck, S. R., new T. P. set
19,500 5550 17" x 100" Cincinnati Hydrashift lathe, 3 & 4-jaw chucks, T. A., S. R., F. R., F. P., 5-C collets, bed turret, etc., rebuilt to new tolerances & painted camera.gif (146 bytes)
3,500 4366 19" x 78" Monarch lathe, T. A., 12" 3-jaw ck., S. R., F. R., F. P., D. P.
7034 19" x 96" LeBlond lathe,
11,500      5815        20"/27" x 60"  Victor/Fortune geared head lathe, 12" 3-jaw, 14" 4-jaw, Anilam DRO, re-built!
39,500 5247 21" x 82" Monarch Hydrashift lathe, new 12" 3-jaw chuck,15" 4-jaw chuck, T. A., S. R., F. R., rebuilt & painted
39,500 6391 21" x 60" Lodge & Shipley Power Turn lathe, 3-jaw chuck, T. A., S. R. rebuilt & painted
25,000 5911 26" x 72" LeBlond lathe, 18" 3 & 4-jaw chucks, rebuilt & painted  camera.gif (146 bytes)
6758 30" x 72" Monarch lathe, 24" 4-jaw chuck, T.A., Fagor DRO, Aloris T.P w/holders, S.R., etc.
7035 Warner & Swasey No. 2A turret lathe
75 No Stock # Supermax follower rest for 13" lathe - new
500 6101 10" Sheldon lathe bed turret
650 No Stock # 15" Sheldon lathe bed turret
1,100 7004 16" Enco bed turret - new!
750 6255 19" to 20" lathe bed turret
550 5876 "Unknown" 1 HP tool post grinder
J & L, Geometric, etc. die heads to 6" diameter

MILLS:  

Price ($)

Stock Number

Size, Type, and Description of Machinery

Get Quote #0000 MANY SIZES OF NEW ACER VERTICAL MILLS ARE AVAILABLE. CALL US FOR LITERATURE AND PRICES! ACER MILLS ARE NOW AVAILABLE WITH 3 HP BALDOR AC VARIABLE SPEED DRIVES WHICH ELIMINATE TROUBLESOME PULLEY PROBLEMS INHERENT IN BRIDGEPORT HEADS.
3,500 6981 Downham Mini-Jig bore w/3-axis Sony DRO, tooling
2,500 6537 Hardinge horz. mill w/vert. head attachment, tooling
2,500 7030 Deckel KF-1 horiz./vert. mill
6017 VICTOR 3 HP VARIABLE SPEED VERTICAL MILL, VISE, COLLETS - NEW
10,800 6250 ACER 3 HP ELECTRONIC VARIABLE SPEED VERTICAL MILL, NEWALL DRO, ALIGN POWER FEED
1,500 6449 Hurco/Bridgeport CNC vertical mill with tooling - "As Is!"
1,500 6450 Hurco/Bridgeport CNC vertical mill with tooling - "As Is!"
1,950 7023 Tree 9-speed vert. mill, power feed table
2,950 6945 Bridgeport 8-speed vert. mill, 9 x 32 table, 12" C.F., re-conditioned
3,250 6992 Bridgeport 8-speed vert. mill, 9 x 32 power feed table, 9" C.F., re-conditioned
4,950 6987 Gorton Mastermil I-22 10-speed vert. mill, 2-axis power feed, 3-axis DRO
4,500 6884 Supermax YCM-16VS var. speed vert. mill, 10 x 50 table, re-conditioned head, painted
2,500 6609 Sajo vert. mill, 3-way power feed
6988 Brown & Sharpe Dynamaster univ. horiz. mill, 13 x 55 table, 3-way power & rapid, mint condition!
950 5986 Kearney & Trecker No. 2HL univ. horiz. mill, 9 x 46 table, 3-way power & rapid? 
1,500 5974 Greeves-Cincinnati horiz. mill
2,500 6082 Greeves-Cincinnati horiz./vert. mill, 12 x 53 power feed table
4,500 6140 Cincinnati 205-12 horiz. mill w/motorized overarm, 12 x 50 table, 3-way power & rapid - re-conditioned!
4,500 5096 Cincinnati No. 3 horiz. mill, 15 x 68 table, 3-way power & rapid, heavy rectangular ways
3,500 6660 Van Norman 1R horz/vert. mill, power longitudinal feed
3,950 6991 Van Norman 1R univ. horiz./vert. mill, power longitudinal feed
950 6664 Van Norman No. 2 horz. mill - "As Is!"
3,500 6308 Van Norman No. 26 horiz./vert. mill 12 x 50 table, 3-way power & rapid
950 6360 Van Norman No. 26 horiz.vert. mill, 12 x 50 table, 3-way power & rapid - As Is!
Parts 6058 Kearney & Trecker Model 307-12 horiz. mill w/vert. head on motorized arm
8,500 6400 Cincinnati Model 400-188 bed type production mill, 96" travel, rise & fall, dual controls
2,000 5553 Nichols Twin Mill, two horizontally opposed spindles w/air feed table - "As Is!"
950 6576 13" International Machine & Tool rotary table
500 6315 20" P&W or K&T rotary table
7054 Hardinge 5-C dividing head
350 6594 6" Carroll dividing head w/ plates & tailstock
550 6517 Roto-Mike sine fixture for layout work
550 6518 Roto-Mike sine fixture for layout work

DRILLS:

Price ($)

Stock Number

Size, Type, and Description of Machinery

950 6659 Hamilton var. high speed sensitive drill press - excellent condition!
150 6690 High Speed Hammer 1-spdl.sensitive drill press
250 6102 14" Delta 2-spdl. drill press
500 6309 14" Delta 4-spdl. drill press
1,100 6925 15" Delta/Rockwell var. speed drill press, 1 phase (cost $2,500 new), excellent condition!
950 6687 15" Powermatic 1-spdl. var. speed drill press on production table
1,750 6931 20" Powermatic var. speed drill w/4-speed gearbox, power down feed
1,250 5945 17" Delta/Rockwell 1-spdl. drill press, rebuilt & painted on table section with legs
750 4904 20" Walker-Turner drill press head & column, rebuilt & painted
Get Quote 3316 20" Walker-Turner 3-spdl. drill press
1,500 7016 24" Allen 1-spdl. 8-speed drill press, back gear for low rpm, 440 volt
1,500 5518 30" Edlund 1-spdl. var. speed drill press, power table
1,500 6295 30" Edlund 1-spdl. var. speed drill press, back gear for low rpm
6,500 6795 30" Edlund var. speed 4-spdl. drill press, 1 power down feed
950 6310 15" Leland-Gifford 6-spdl. drill press
1,950 5946 26" Leland-Gifford 6-spdl. drill press
1,950 6829 Burgmaster 1D turret drill
1,500 6811 30" throat x 4" column Rockwell radial arm drill press, 175 tp 8200 rpm, excellent condition!
7029 3' x 9" col. American Hole Wizard radial drill, plain box table
1,500 6139 4' x 11" column American Hole Wizard radial drill
7032 4' x 13-1/2" col. American radial drill, plain box table, boring head, tooling
200 4542 Rockwell air drills
100 5954 Lassey hand tapper

GRINDERS:

Price ($)

Stock Number

Size, Type, and Description of Machinery

Get Quote #0000 MANY SIZES OF NEW ACER SURFACE GRINDERS ARE AVAILABLE. CALL US FOR LITERATURE AND PRICES.
450 4375 14" Heavy Duty pedestal grinder (name unknown)
11,000 0936, 4867 5" x 10" Taft Pierce hand surface grinder rebuilt to new tolerance and painted
1,950 6542 6" x 12" DoAll X-axis hyd. surface grinder, elect. mag., coolant-clean!
1,950 6112 6" x 18" Covel hand feed surface grinder
2,950 6684 6" x 18" K.O. Lee hyd. surface grinder
7,500 6643 6" x 18" Boyar-Shultz hyd. surface grinder, rebuilt X&Y axis, painted
7,500 6644 6" x 18" Boyar-Shultz hyd. surface grinder, rebuilt X&Y axis, painted
14,500 5555 6" x 18" Norton hyd. surface grinder remanufactured to new
5523 6" X 18" ACER SUPRA HAND FEED SURFACE GRINDER W/CK. - NEW!
1,950 5992 6'' x 18'' Brown & Sharpe Micromaster hand feed surface grinder
7033 6" x 18" Brown & Sharpe Micromaster hydraulic surface grinder, 6" x 18" magnetic chuck
3,500 6444 6'' x 18'' Brown & Sharpe Micromaster hydraulic surface grinder, 6" x 12" elect. magnetic chuck, power Z-axis, coolant
3,950 6475 6'' x 18'' Brown & Sharpe Micromaster hydraulic surface grinder, elect. magnetic chuck, Sony DRO, coolant
14,500 6671 6" x 18" Brown & Sharpe Micromaster hyd. surface grinder, mag. chuck, coolant, rebuilt to new tolerances & painted
16,500 6910 6" x 18" Brown & Sharpe Micromaster hyd. S. G., mag. ck., cool., inc. downfeed, rebuilt & painted
6958 10" x 24" Brown & Sharpe Micromaster hyd. S. G., mag. chuck, coolant
1,500 6332 8" x 24" Brown & Sharpe Tech-Master surface grinder - As Is!
1,500 6333 8" x 24" Brown & Sharpe Tech-Master surface grinder - As Is!
950 5416 10" x 15" Abrasive No. 1 1/2 hand surface grinder w/chuck
950 5635 8" x 24" DoAll hyd. surface grinder w/mag. chuck, As Is!
6,500 6417 12" x 24" Gallmeyer & Livingston hydraulic surface grinder with magnetic chuck
7,500 6089 12" x 24" Thompson hydraulic surface grinder w/ 12" x 24" electromagnetic chuck, dresser - re-conditioned!
7000 14" x 24" Elb 3-axis surface grinder, 12 x 24 chuck, for remanufacture into CNC grinder
6999 14" x 24" Elb 3-axis surface grinder, 12 x 24 chuck, for remanufacture into CNC grinder
6655 12" x 48" Elb 3-axis surface grinder, 12" x 48" magnetic chuck
19,500 6654 5" x 12" Myford cylindrical grinder, rebuilt to new tolerance & painted like new
19,500 6772 7.5" x 18" Tschudin univ. cylindrical grinder, lever collet closure, Sony DRO
7,500 6625 10" x 20" Norton universal cylindrical grinder, swing down I.D., re-conditioned
6967 10" x 20" Cincinnati universal cylindrical grinder, missing tailstock
9,500 6620 14" x 24" Landis 2R univ. cylindrical grinder, swing down I.D.
450 6827 Import 5-C sensitive work head, indexing w/finger (metallic blue)
950 6813 Harig Steptool relief grinding fixture
750 Cincinnati No. 2 radius grinding attachment
3,500 5824 Cincinnati No. 2 tool & cutter grinder, re-conditioned
6,500 5552 Cincinnati No. 2 tool & cutter grinder, rebuilt & painted
6773 G & L WinslowMatic HR semi-automatic drill grinder
950 Cawi drill grinder (3) each
1,500 5725 Hybco Model 1100 tap grinder
1,500 6312 Hybco Model 1100 tap grinder
59,500 6955 16" Blanchard No. 11 rotary grinder, rebuilt to new tolerances, painted like new
84,500 5899 16" Blanchard No. 11-20 rotary grinder, re-manufactured to new tolerances, painted like new
104,500 5900 16" Blanchard No. 11 rotary grinder, re-manufactured & retrofitted w/Fagor 2-axis CNC control
6888 30" Blanchard No. 18 rotary grinder
117,950 6507 36" Blanchard/Fagor No. 18 CNC 1-axis rotary grinder, full enclosure
65,000 6897 36" Blanchard No. 18 rotary grinder, 1/4" chuck life, rebuilt to new tolerances & painted like new
134,500 5894 36" Blanchard/Fagor No. 18 CNC 2-axis rotary grinder, full enclosure, completely automatic
104,500 6070 36" Blanchard No. 18 rotary surface grinder re-manufactured, high column
6874 36" Blanchard No. 20-36 rotary grinder w/vacuum chuck
119,500 6857 42" Blanchard No. 22-42 rotary grinder, re-manufactured, full enclosure, etc.
149,500 6889 42" Blanchard No. 22-42 rotary grinder, re-manufactured & retrofitted w/Fagor 2-axis CNC, full enclosure, etc.
59,500 6813 Bryant/XLO/Van Norman centerless grinder, excellent condition, little use!

SHEETMETAL, FABRICATION & WELDERS:

Price ($)

Stock Number

Size, Type, and Description of Machinery

50 6174 3" Kidder lever operated hand punch (2)
750 5039B 6" x 6" x 16 ga. Wales-Strippit corner notching die
650 5039A 6" x 6" x .093 ga. Wales-Strippit corner notching die
950 2328 8.5" x 8.5" x 10 ga. GP-49 notching die, 35 ton
450 4430 Perkins Model JS6K small bench punch press
15,000 5622 Verson 90 ton OBI punch press, air clutch, long stroke
550 7053 Niagara No. 188 heavy gage crimping & beading machine w/standard, 18 gage capacity
1,250 7049 Niagara No. 13 ?  3-1/2" to 48" x 22 ga. power circle shear, 1/3 HP, 1 phase
6,500 7048 8' x 14 ga. Wysong power shear, B.G., front support arms, squaring arm
1,250 7022 8' x 16 ga. Economy apron brake
7,500 8' x 75 ton/55 ton Cincinnati press brake, no B.G.
7,500 4376 6' x 12 ga. Webb initial pinch power roll
500 4667 P & H Model 500-40 VS linear slope DC voltage welder

SAWS:

Price ($)

Stock Number

Size, Type, and Description of Machinery (Click on Camera for Photo)

500 6830 Racine power hacksaw
750 5469 22" Kalamazoo abrasive saw
750 5614 24" Stone Type M75 abrasive saw
1,500 9" x 16" Kalamazoo horizontal bandsaw re-conditioned
3,350 6582 10" x 16" Cosen Horizontal Band Saw New! Price includes freight.
1,450 7052 18" Grob Model NS-18 vert. bandsaw, welder, table power feed
1,500 6742 25.5" DoAll variable speed vertical bandsaw for wood
4,250 7031 20" DoAll variable speed vert. bandsaw, blade welder, excellent condition!
6869 Marvel No. 81A hydraulic feed, tilt frame vertical bandsaw, rebuilt and painted
3,500 5971 Heller Model  SSH630A hydraulic cold saw with automatic bar feed 9" x 12" cap.

WOODWORKING:

Price ($)

Stock Number

Size, Type, and Description of Machinery

350 6628 24" Delta scroll saw
450 6952 24" Rockwell scroll saw with stand
250 6949 24" Delta scroll saw with stand
250 6951 24" Delta scroll saw with stand
1,950 6947 13" Rockwell planer, rebuilt with all new bearings
3,500 6911 18" Powermatic planer, rebuilt with all new bearings
1,250 6948 8" Wallace jointer, 1 phase
550 6922 4" Delta jointer with 9" Delta table saw, rebuilt with new bearings
650 6638 10" J-Line (Yates-American) table saw
650 6239 10" Delta/Rockwell table saw w/ fence
1,950 6841 14" Rockwell table saw with fence and mitre gage
1,950 6742 25.5" DoAll variable speed vertical bandsaw for wood
1,250 6914 12"/16" x 38" J-Line (Yates-American) var. speed wood lathe, rebuilt with new bearings & painted
1,250 6915 12"/16" x 38" J-Line (Yates-American) var. speed wood lathe, rebuilt with new bearings & painted
1,250 6916 12"/16" x 38" J-Line (Yates-American) var. speed wood lathe, rebuilt with new bearings & painted
650 J-Line (Yates-American) shaper w/o fence
1,500 0761 Whitney 294 2-spdl. auto. shaper w/freq. generator
450 6632 Morrison overhead pin router
650 6633 Rockwell/Delta pin router
1,950 4521 Onsrud pin router
450 6630 22" Round table (Make unknown) spindle sander

MISC. MACHINERY:

Price ($)

Stock Number

Size, Type, and Description of Machinery

1,500 1649 Ingersoll-Rand 100 HP rotary-type air compressor
Get Quote 5850 Davey Permavane Model 50BAO 50 HP rotary-type air compressor
Get Quote No Stock # Worthington 40 HP R-150-40 rotary screw compressor
750 6707 C & H 10 HP compressor
1,950 6746